Application:
The Frinorm type DNS, DNL and DNX thermal insulation boards are suitable for subsequent installation on ceilings and walls in underground car parks, garages and cellars in new and converted buildings, as well as in old-building renovation. They are suitable for single- and multi-family homes as well as for commercial, industrial, agricultural and public buildings.
Properties:
- Outstanding thermal insulation values up to 0.15 W/m²K
- Versions: with expanded polystyrene rigid foam (EPS), 15 kg/m³, expanded polystyrene rigid foam with graphite additive (EPS lambda), 20 kg/m³, or extruded polystyrene rigid foam (XPS), 33 kg/m³
- Element thicknesses up to 200 mm can be produced
- Cement-bonded chipboard as cover panel, water-resistant, impact-resistant and non-flammable
- Rot-resistant, resistant to vermin and mould
- Dimensionally stable and non-warping
- Free of thermal bridges, impeccable panel joints
- Washable and pressure-washer-resistant
- Attractive, aesthetic bottom view
- Manageable format
- Quick and easy installation
Product description:
| Cover panel |
Cement-bonded chipboard, untreated or coated with white primer, 10 mm |
| Insulation |
EPS, 15 kg/m³ or EPS lambda, 20 kg/m³ or XPS, 33 kg/m³
|
| Thickness |
DNS: 80, 90, 100, 110, 120, 130, 140, 150, 160, 170, 180, 190, 200 mm
DNL: 80, 90, 100, 110, 120, 130, 140, 150, 160, 170, 180, 190, 200 mm
DNX: 90, 110, 130, 150, 170, 190 mm
|
| Sizes |
1235 x 585 mm (0,722m²) |
The Frinorm thermal insulation boards have outstanding thermal insulation properties. They are available in three different versions: type DNS is produced using expanded polystyrene rigid foam (EPS), 15 kg/m3, type DNL uses expanded polystyrene rigid foam with graphite additive (EPS lambda), 20 kg/m3, while type DNX uses extruded polystyrene rigid foam (XPS), 33 kg/m3. The thermal insulation boards are covered with a 10 mm cement-bonded chipboard which is not only water-resistant and impact-resistant, but also non-flammable. The fastening is concealed, without visible screws, with the Z mounting bracket which hangs in the groove of the thermal insulation. The cement-grey surface of the cement-bonded chipboards is available untreated or with white primer. It can be left untreated or coated with emulsion paint. The circumferential groove and tongue joint ensures there is no thermal bridge and the panel joints are visually perfect. Once installed, the insulation panel is a cover with an aesthetic and attractive bottom view.